MTP/MPO 16P Loopback
MTP/MPO loopback contains MTP/MPO loopback patch cord, which passes both ends of the optical fiber into one MTP/MPO ferrule, so that the optical path is in the same connector, without changing the signal or repeating the signal back to its itself. It can provide an effective solution to test the transmission capability and reception sensitivity of network equipment, especially in 40/100G network communication, it can locate various potential phenomena through the backhaul signal, so as to achiev
Fiber optic loopback incorporates two fiber optic connectors which are plugged into the
output and input port of the equipment respectively. Therefore, fiber loopback cables can
be classified by the connector types, such as LC, SC, MPO and MTP. These fiber optic
loopback connectors are compliant with IEC, TIA/EIA specifications.
Besides, the fiber optic loopback also can be used on single mode 9/125, multimode 50/125,
62.5/125, OM3, OM4.
The MTP/MPO fiber optic loopback is one of the most popular loopbacks. support the test of
transceivers featuring MTP/MPO interface. 12fibers, 16fiber, and 24fibers or more can be
chosen, and also can be defined the cable Polarity by customize, They can comply with low
insertion loss, low back reflection and high precision alignment.
Specification:
- Single-mode multi-mode optional, end face PC or APC8° optional
- Low loss and standard loss optional
- Outer frame color optional (Violet, Aqua, Yellow)
- guide pin is optional
- Fiber type optional
Method:
复制产品链接
长按图片保存/分享
询盘
询盘
茉莉花
