E2000/LSH Fiber Optic Components
作者：Jasmine
浏览：
发表时间：2024-10-11 17:45:08
E2000/LSH Family
Constant innovation in fiber optics has created demand for products with ever-increasing performance requirements. LUCOTEK has responded to this challenge and expanded the E2000 family system to address these needs throughout all market segments.
LUCOTEK Provide the 0.1 dB maximum insertion loss and exceptional repeatability, while maintaining the already well-established, superior features of the E2000 connector family.
E2000/LSH
Connector kits
Specification:
|
|
Unit |
Multimode |
Single mode |
||
|
PC |
APC |
APC Low Loss |
|||
|
Insertion Loss (IL) |
dB |
Typ. 0.15Max 0.4 |
Typ. 0.15Max 0.4 |
Typ. 0.2Max 0.4 |
Max 0.15 |
|
Return Loss (RL) |
dB |
/ |
Min 50 |
Min 60 |
Min 65 |
|
Repeatability of IL |
dB |
Max ±0.2 |
Max ±0.1 |
||
|
Storage temperature |
°C |
-40～+85 |
|||
Connector types and Dimensions:
Connector Types:E2000/LSH Simplex 0.9mm
E2000/LSH Simplex 2.0mm
E2000/LSH Simplex 3.0mm
Ferrule Material:Zirconia and Metal
Ferrule Bore:80um to 1000um
Dust Cap: Plastic shutter and Metal laser shutter
E2000/LSH
Simplex 0.9mm
E2000/LSH
Simplex 2.0mm
E2000/LSH
Simplex 2.0mm, with metal dust cap
E2000/LSH Adapter
Specification:
|
|
Unit |
Multimode |
Single mode |
|
|
Standard Loss |
Low Loss |
|||
|
Insertion Loss (IL) |
dB |
Typ. 0.15Max 0.2 |
Typ. 0.15 Max 0.2 |
Typ. 0.08Max 0.15 |
|
Repeatability of IL |
dB |
Max ±0.1 |
||
|
Storage temperature |
°C |
-40～+85 |
||
Adapter types and Dimensions:
Adapter Types:E2000/LSH Simplex Adapter,With Plastic Flange
E2000/LSH Simplex Adapter, Metal Flange and M2 screw
E2000/LSH Simplex Adapter, Metal Flange
E2000/LSH Simplex Adapter, Flangeness
E2000/LSH - LC-SC-FC Simplex Adapter
Sleeve Material:Zirconia
E2000/LSH
Simplex Adapter, Plastic Flange
E2000/LSH
Simplex Adapter, Metal Flange and M2 screw
E2000/LSH
Simplex Adapter, Metal Flange
E2000/LSH Simplex Adapter, Flangeness
E2000/LSH
- LC-SC-FC Simplex Adapter
E2000/LSH Fixed Attenuator
Fiber
optic attenuators are devices to reduce the optical fiber power
within the fiber-optic network. Fiber Attenuators are usually used
when the signal arriving at the receiver is too strong and hence may
overpower the receiving elements. This E2000/LSH fiber attenuator is
suitable for 1310nm and 1550nm operation. Fixed attenuation values
are available in 1dB increments from 1 to 25 dB. Each E2000/LSH
attenuator with a test report that makes it easy for customers to
check the optical performance quickly.
Specification:
|
Gender |
Fixed Male to Female |
||
|
Attenuator |
1~25 dB |
Ferrule Type |
Ceramic |
|
Attenuator Accuracy |
1~5dB ±0.5dB; >5dB ±10% |
Test Wavelength |
1310 and 1550nm |
|
Return Loss (RL) |
UPC≥50dB, APC≥60dB |
Operating Wavelength |
1260~1620nm |
|
Storage temperature |
-40～+85 |
Max Optical Input Power |
200mw |
Dimensions:
E2000/LSH Patch cord
|
Measurement |
Parameters |
|
high-low temperature cycle experiment |
-40~+85°C / 168H |
|
high temperature and high humidity experiment |
+85°C / 85% r.h / 168H |
|
salt spray test |
5% / 48H |
|
Tensile strength |
6.8KG / 2Min |
|
Proof at at 90° |
2.3~3.4KG /5s |
|
Twist |
1.35kg / 10cycles |
|
Bending |
10N / 2Min |
Specification:
|
|
Unit |
Multimode |
Single mode |
||
|
PC |
APC |
APC Low loss |
|||
|
Insertion Loss (IL) |
dB |
Typ. 0.15Max 0.4 |
Typ. 0.15Max 0.4 |
Typ. 0.2Max 0.4 |
Max 0.15 |
|
Return Loss (RL) |
dB |
/ |
Min 50 |
Min 60 |
Min 65 |
|
Repeatability of IL |
dB |
Max ±0.2 |
Max ±0.1 |
||
|
Storage temperature |
°C |
-40～+85 |
|||
Environmental and mechanical conditions:
点击右上角
分享给朋友吧
长按图片保存/分享
0
茉莉花
